Ø45mm/1.77" Signal Towers

Description

Description of The Signal Towers

The Ø45mm/1.77” signal towers are supplied completely assembled with the possibility of up to 3 light modules with a sound module. The high-brightness LED circuit lighting ensures low consumption and long life.

General Technical Specifications

• Supply voltage : 24VDC (± 10%)
• Light module consumption : 37mA par module
• Sound module consumption : 15mA (Applicable on models with sound modules)
• Sound intensity : 80 dB / 1 m, pulsed or continuous sound (Applicable on models with sound modules)
• Material: polycarbonate
• Connections: screw clamp terminals and maximum conductor section 1.5mm2
  /16 AWG
• Tightening torque: 0.5Nm/4.5lbin
• Operating temperature: -20…+50°C
• IEC degree of protection: IP54.

Certifications and compliance

• Certifications obtained : cULus, EAC
• Compliant with standards : IEC / EN 60947-5-1, IEC / EN 60947-1, UL508, CSA C22.2 n° 14

Technical Specifications for Each Model

Interpretation of light and sound signals for signal towers and beacons

Light and sound signals are a fundamental element for the safety of a system. To avoid incorrect interpretations, a European standard has been introduced attributing an unambiguous meaning to visual or audible signals. Each colour or sound alarm corresponds to a specific state of operation of the connected system and various levels of warning, as shown in the table above, according to EN 981-IEC/EN 60073 standards. The white module can be assigned a meaning as desired.

Accessories : Fixing Base for Signal Towers